nvme two-disk mobile hard disk box

USB2.0 disk box

Modle:GC-A10
Material:ABS
Product color: transparent, translucent, black
Ootput: micro B to SATA
Scheme:ASM225
Transmission speed : USB3.0(40MB/s)
Supported Capacity:4TB MAX
It supports 5Gbps USB3.0 transmission protocol and is compatible with USB2.0.
Supported System:Windows /Mac

Whether a mobile hard drive case is easy to use or not, the design is the key. Generally speaking, most mobile hard drive cases have the following designs.  HDD Enclosure    SSD Enclosure

Heat dissipation holes: If the casing of the mobile hard drive case is not a good conductor of heat, it should have heat dissipation holes all over it to help dissipate heat from the hard drive. For 2.5-inch hard drives, this is not too much to worry about as the heat itself is relatively well controlled.

Anti-dust design: install a seal on the mobile hard drive casing to reduce the invasion of dust, provided, of course, that the casing dissipates heat well.

Anti-slip design: the design of the mobile hard drive casing on the anti-slip pattern, or the installation of anti-slip plastic pads and so on, in order to increase the friction of the casing to prevent the hard drive casing from inadvertently falling out of the hands.

Anti-shock design: a good hard drive case, in the interior, the surface, especially the corners that are easy to bump should be covered with elastic material, or deal with rounded corners to reduce the impact of external shocks on the hard drive. Usually, the non-slip material also plays a dual role as an anti-impact cushion.

Hard drive indicator: leave a hard drive signal light on the housing, when the hard drive has data read or stored the light will flash to alert the user's attention. In addition, the indicator should be located in a location that is easy to see. Some simple design products either do not have indicators, or indicators on the board is not ideally located, reason interface is too close, the line of sight is easily blocked.